Differences

This shows you the differences between two versions of the page.

--- ycsserver:sysop:server [2020/09/22 14:04] – oe1kbc
+++ ycsserver:sysop:server [2024/10/12 18:53] (current) – external edit 127.0.0.1
@@ Line 1: / Line 1: @@
 ===== SYSOP introduction =====
-Several tables are available for controlling the YCS server. The tables are located in the //**/opt/YCS**// directory. The tables can be edited with an editor. The YCSServer checks every 30 seconds whether a table has been changed and reads it in automatically if a change has taken place.
+Several tables are available for controlling the YCS server. The tables are located in the //**/opt/YCS**// directory.\\
+\\
+The tables can be edited with an editor. The YCSServer checks every 30 seconds whether a table has been changed and reads it in automatically if a change has taken place and include the new info to the running system.
   * [[ycsserver:sysop:server:dgidlist | DG-ID List]]
-  * [[ycsserver:sysop:server:dr2xlist | DR-2X List]]
+  * [[ycsserver:sysop:server:dr2xlist | DR-2X List (new info to DG-ID ondemand)]]
   * [[ycsserver:sysop:server:control | CONTROL]]
   * [[ycsserver:sysop:server:keytable | KEY-Table]]
+  * [[ycsserver:sysop:server:ysflink | YSFLink]]
+  * [[ycsserver:sysop:server:fcslink | FCSLink]]
+So that the YCS server can be reached from a HOTSPOT (MMDVM, PiStar, OpenSpot), the YCS server must be registered in the YSFRegister system. This can be done via the page https://register.ysfreflector.de/. Please follow the scheme when registering so that the YCS can be found together with Serach "(YCS").\\
+{{:ycsserver:overview:ysfregister.png?nolink|}}
+\\
+\\
+\\
+For new features like YSFLink and FCSLink you need to download the //**YSFHosts.txt**// file.\\
+\\
+An example would be following line in root's crontab, that fetches the reflector-list each 30 minutes:\\
+\\
+//**sudo crontab -e**//\\
+\\
+add following line:\\
+\\
+//***/30 * * * * wget -O /opt/YCS/YSFHosts.txt http://register.ysfreflector.de/export_csv.php**//\\